Seed Hawk GRANULAR AND LIQUID TANKS 2010 - Manual (Page 53)

Seed Hawk Manual Granular and Liquid Tanks Page 51
9.4 FAN SETTINGS
Select which Fan you would like to view
or make changes to.
9.4.1 Pulses Per Rev
This is the number of pulses produced
by the fan sensor in one revolution. The
pulse setting is equal to the number of
targets presented to the fan sensor in
one revolution.
9.4.2 Low Alarm Point
The Low Alarm Limit is set by the user
for low rpm notification. Default is 1500
RPM
9.4.3 High Alarm Point
The High Alarm Limit is set by the user
for high rpm notification. Default is 5500
RPM.
**Fan RPM above the High Alarm Point
or Below the Low Alarm Point will cause
an alarm condition that cannot be
acknowledged.
9.5 BIN SETTINGS
The Bin Settings Menu gives you the
ability to enable or disable the bin
alarms.