Town square, 5' x 42" premium air bath, High gloss – American Standard 2748.328 User Manual
Page 2
H28
© 2008 AS America Inc.
TOWN SQUARE
®
5' x 42"
PREMIUM AIR BATH
HIGH GLOSS
Rev. 2/08
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
OPTIONAL TILING BEAD KIT No. 751755-200 AVAILABLE.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
59-1/2"
(1511mm)
INTEGRAL
FITTING DECK
2-1/2" X 14"
(64 X 356mm)
29-3/4"
(755mm)
41-5/8"
(1057mm)
CONTROL
PANEL
OUTLINE OF CUTOUT
58" X 40-1/8"
(1473 X 1019mm)
PROVIDE ACCESS TO BLOWER FOR
SERVICE ON ALL INSTALLATIONS
C/L OF
DRAIN
OUTLET
FLOOR CUTOUT
9" X 18"
(229 X 458mm)
3/4"
(19mm)
14-1/2"
(368mm)
5-1/4"
(133mm)
3"
(76mm)
OUTLINE OF SKID
RESISTANT SURFACE
20 AIR JETS
EDGE OF
FLOOR
CUTOUT
AIR
BLOWER
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2" N.P.T. THREADS
2"
(51mm)
5-3/4"
(146mm)
C/L OF
OVERFLOW
21"
(533mm)
23"
(584mm)
ROUGH
FLOOR
INTEGRAL FEET WITH
ATTACHED BASEBOARD
1-1/2" O.D. TAILPIECE
3/4"
(19mm)
3-1/8"
(79mm)
AIR
BLOWER
7-3/4" TYPICAL
(197mm)
10-1/4"
(260mm)
GENERAL SPECIFICATIONS FOR 2748
AIR MASSAGE SYSTEM
59-1/2 x 41-5/8 x 23 In. (1511 x 1057 x 584mm)
110 Lbs. (50 Kg.)
611 Lbs. (278 Kg.)
60 Gal. (227 L)
34 x 24 In. (864 x 610mm)
52 x 31 In. (1321 x 1321mm)
12-1/2 In. (318mm)
40 Lbs./Sq.Ft. (194 Kgs./Sq.m)
27.8
45.4
1.0 HP, 10 AMPS ,120V.
BLOWER
ELECTRICAL SPECIFICATIONS
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)