Seca 874 - Manual (Page 16)

16
2 in 1 function
The 2 in 1 function enables the body weight of babies and small children to be deter-
mined. The child is held in the arms of an adult. Proceed as follows.
– Press the start key with no load on the
scale.
– Wait until the display
0.00
appears.
– Stand on the scale without the child.
You can read off the weighing result on
the digital display.
– Now press the 2 in 1 key to activate the
function.
The scale stores the weight of the adult
and the display returns to zero.
0.00
and
the display NET appear in the display.
– Now take the child onto the scale. You
can leave the scale to do this, in which
case
-----
appears in the display.
The scale determines the weight of the
child. Once the value is stable for about
3 seconds, the display is retained. This
avoids the display jumping about as a
result of the child’s movements.
HOLD and NET appear in the
display.
If several children are to be weighed
consecutively, it is important that it is
always the same adult who performs
the measurement and that this per-
son’s weight does not change (e.g.
due to a piece of clothing being removed).
The 2 in 1 function remains switched on until
– you press the 2 in 1 key again (total weight is displayed).
– the scale switches off automatically.
5. Cleaning
Clean the outside of the scale as required using a domestic cleaning agent or a commer-
cially-available disinfectant. Follow the manufacturer’s instructions.
kg
0.00
2 in 1 key
kg
6.50
HOLD NET