Seca 385 - Manual (Page 15)

Model 384/385 15 GB
– Open the battery compartment lid and
insert the batteries supplied according
to the polarity shown on the battery
compartment.
Check that polarity is correct!
– Now close the battery compartment
cover again carefully.
Setting up the scale
– Place the scale on a level and stable
surface. Then position the tray as
shown on the base of the scale and pull
forward until the tray is heard to snap
into place, and the release button is in
the top position.
The tray is now securely interlocked
with the base.
– Align the scale by undoing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle.
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.
– To remove the tray just press the re-
lease button hard and slide back the
tray.
Important!
The alignment of the base of the scale
must be checked and corrected if ne-
cessary every time the location of the
scale is changed.
spirit level