SANDPIPER MP05D - Manual (Page 5)

Model MP08D Design Level 1 Page 2 520-169-000 3/03
ITEM TOTAL
NO. PART NUMBER DESCRIPTION RQD.
33 050-017-365 Ball, Check Valve 4
050-017-360 Ball, Check Valve 4
050-017-364 Ball, Check Valve 4
050-018-600 Ball. Check Valve 4
34 518-119-156 Manifold, Suction 1
35 518-120-156 Manifold, Discharge 1
36 902-003-000 Stat-O-Seal 2
37 170-066-330 Capscrew, Hex Head 8
38 900-003-330 Washer, Lock 8
39 545-008-330 Nut, Hex 8
41 196-047-156 Chamber, Outer 2
42 530-008-000 Muffler, Exhaust 1
43 196-083-156 Chamber, Driver 2
196-140-156 Chamber, Driver (with PTFE overlay) 2
44 286-042-365 Diaphragm 2
286-042-363 Diaphragm 2
286-042-360 Diaphragm 2
286-042-364 Diaphragm 2
286-042-366 Diaphragm 2
286-042-356 Diaphragm 2
286-041-604 Diaphragm 2
45 538-083-115 Nipple, Pipe 4
46 286-020-604 Overlay Diaphragm 2
47 132-022-360 Bumper 2
48 618-003-110 Plug, Pipe 4
49 835-005-115 Tee, Pipe 4
50 426-041-000 Hose Assembly 2
51 866-059-115 Fitting, Male 4
52 618-025-110 Boss Plug and O-Ring 2
53 031-089-156 Main Air Valve Assembly 1
(Inc. Items 9,10,11,13,14, 15, 16)
54 210-008-330 Clip, Safety 1
55 560-023-360 O-Ring, End Cap 2
* Item 6 is available in Kit Form. Order P/N 031-055-000 which also
includes items 5, 7, 12 & 47.
Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use.
They are readily available from most
MARATHON distributors. The pump owner
may prefer to maintain a limited inventory
of these parts in his own stock to reduce
repair downtime to a minimum.
IMPORTANT: When ordering repair parts
always furnish pump model number, serial
number and type number.
MATERIAL CODES
The Last 3 Digits of Part Number
Continued from previous page
375…Fluorinated Nitrile
378…High density Polypropylene
405…Cellulose Fibre
408…Cork and Neoprene
425…Compressed Fibre
426…Blue Gard
440…Vegetable Fibre
465…Fibre
500…Delrin 500
501…Delrin 570
505…Acrylic Resin Plastic
520…Injection Molded PVDF Natural Color
540…Nylon
541…Nylon
542…Nylon
544…Nylon Injection Molded
550…Polyethylene
551…Polypropylene
552…Unfilled Polypropylene
553…Unfilled Polypropylene
555…Polyvinyl Chloride
570…Rulon II
580…Ryton
590…Valox
591…Nylatron G-S
592…Nylatron NSB
600…PTFE (virgin material) Tetrafluoroethylene (TFE)
601…PTFE (Bronze and moly filled)
602…Filled PTFE
603…Blue Gylon
604…PTFE
606…PTFE
610…PTFE Encapsulated Silicon
611…PTFE Encapsulated Viton
Delrin, PTFE, Viton and Hytrel are registered
tradenames of E.I. DuPont.
Gylon is a registered tradename of Garlock. Inc.
Nylatron is a registered tradename of Polymer Corp.
Rulon II is a registered tradename of Dixion Industries
Corporation.
Hastelloy-C is a registered tradename of Cabot Corp.
Ryton is a registered tradename of Phillips Chemical
Company.
Valox is a registered tradename of General Electric
Company.