SANDPIPER U1F - Manual (Page 9)

u1fmdl1sm-rev0614 Model U1F UL79 Listed Metallic Design Level 1 Page 7
CAUTION
The air exhaust should be
piped to an area for safe
disposition of the product
being pumped, in the event
of a diaphragm failure.
INSTALLATION GUIDE
Top Discharge Ball Valve Pump
1
3
1
2
3 Surge Suppressor
Filter/Regulator
Air Dryer
2
CAUTION
Use a gasoline-resistant pipe
compound to make pipe joints tight.
Pump shall be installed in accordance to Flammable
and Combustible Liquids Code, NFPA 30 or the Automotive
and Marine Service Station Code, NFPA 30A, as appropriate
to the intended use of the pump.
The pump must be rigidly mounted
with fasteners to a conductive base
or natural ground.
To maintain conductivity,
do not paint the pump, or if
painted, use a conductive
paint or coating.
WARNING