RIKON Power Tools 20-100 - Manual (Page 11)

Installing Access Cover
1. Install access cover by placing bottom of
panel into access in stand and fasten by
turning latch knob. (Figure 12)
Installing Dust Chute
1. Attach the dust chute (Figure 13) to the base
with four 1/4"-10x1/2"pan head screws and
four washers.
Figure 12
Figure 13
90º Fence Adjustment
1. Set in-feed table to the same height as the out-
feed table.
2. Move the fence by releasing lock handle
(A-Fig. 14) and pushing the fence assembly
until it overlaps the tables.
3. Adjust the fence to a 90
º
angle by releasing
lock handle (B-Fig. 14).
11
Assembly
Figure 14
Adjustments
A
B
A B