RIKON Power Tools 70-300 - Manual (Page 5)

5
Contents of Package
WARNING
Read and understand the entire contents of this manual before attempting assembly or operation!
Failure to comply may cause serious injury!
Contents of Package:
1. Lathe
1. Tailstock
1. Headstock
1. Tool Rest Body
1. Tool Basket
1. Guard Assembly
1. Accessory Package
1. Owner’s Manual & Warranty Card
1. Leg Set
Contents of Accessory Package
Accessory Package Box
1. Live Center
1. Rod for Live Center
1. Spur Center
1. Index Pin
1. Face Plate
1. Knockout Rod Headstock
1. Tool Rest
1. Tool Rest Extension
4. Adjustable Feet
Unpacking and Clean-Up
1. Remove the shipping container. Do not discard any shipping material until the lathe is set
up and running properly.
2. Remove hex cap bolts from skid bottom and move the lathe off the skid and into position.
3. Clean all rust protected surfaces with a cleaner degreaser. Clean thoroughly under the
headstock, tailstock and tool rest body.