RIKON Power Tools 34-250 - Manual (Page 5)

5
Contents of Package
Unpacking and Checking Contents
Item Description
1 Feed Handle
2 Tool Holder
3 1/4” Mortising Chisel and Bit
4 5/16” Mortising Chisel and Bit
5 3/8” Mortising Chisel and Bit
6 1/2” Mortising Chisel and Bit
7 Hold Down Support Rod (Short)
Item Description
8 Hold Down
9 Hold Down Locking Handle
10 Gas Return Strut
11 Hex Bolts M8-1.25 x 80 (4)
12 Riser Block
13 Hold Down Support Rod (Long)
14 Owner’s Manual
Benchtop Mortising Machine
Model: 34-250
Owner
’s Manual
For more information:
www.rikontools.com or [email protected]
For Parts or Questions:
[email protected] or 877-884-5167
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
Part # 34-250M1
Unpack your mortising machine from its carton and check to see that you have all of the following
items. Set packing material and shipping carton to the side. Do not discard until machine has been
set up and is running properly.
Do not turn your machine ON if any of these items are missing. You may cause injury to yourself or
damage to your machine. If parts are missing contact RIKON customer service at 877-884-5167 or
[email protected].
1
2
3 4 5 6 7 8 9
10
11
12
13
14