RIKON Power Tools 30-240 - Manual (Page 5)

Model 30-240 20” Floor Drill Press is shipped complete in one box.
Unpacking and Checking Contents
a. Separate all “loose parts” from packaging materials and check each item with “Table of Loose
Parts” to make sure all items are accounted for, before discarding any packaging material.
b. With the help of another person, carefully lift the Drill Press head out of the box.
c. Remove protective oil that is applied to the table and column before assembly. Use any ordinary
house hold type grease or spot remover.
d. Apply a coat of paste wax to the table and column to prevent rust. Wipe all parts thoroughly with a
clean dry cloth.
TABLE OF LOOSE PARTS
Item Part Name Qty
A Table Assembly 1
B Box with Chuck & Key 1
C Bag of Loose Parts 1
D Drill Press Head 1
E Feed Handle 1
F Column Assembly 1
G Base 1
H Bag of 2 Belts 1
I Owner’s manual 1
Contents of Package
5