Mediabridge MHP-EA200X2 User Guide - Manual (Page 10)

Powerline Network Adapter
6
Method 2:
As seen below: Rooms A and B are under a single electricity meter. Plug in
the first MHP‐EA200 into a wall outlets in Room A and connect it to a Router
or Modem/Router Gateway (or any network connection capable of
supporting multiple connections via DHCP)
using an Ethernet cable. Plug in
the second MHP‐EA200 into the wall outlet in Room B and connect it to a PC
or other network device using another Ethernet cable.
Figure 1‐4 Connecting a Powerline Network to the Internet
2.2 Installation Instructions
1 . Connect the RJ45 port on the first MHP‐EA200 to one of the LAN ports on
your Router or Modem/Router Gateway. And then plug it into a wall outlet
as seen below: