LT Security LTD451H6 - Manual (Page 23)

USER MANUAL
20
9、Parameter setting
Default Access Point：Indicate select access point. System default the access point is GPRS connection.
Channel:Channel: Select the channel you want to monitor and click [OK] button to start video connection
Server IP address / Domain name
Network connection status: percentage of buffer display, connection success, connection fail, play and stop.
Channel select, PTZ control, Zoom in/out, Focus and Iris
Play/Stop, Full screen/ Normal display, Capture, Parameter setting and Exit【】
5.2.6.5 Motion Detect
5.2.7 System Function
Click [MainDeviceMotion] to enter into the [Motion Detect] menu for
relative parameter setting.
The [Motion detect] Menu has three parameter items, including Channel
Status, Sensitivity and MD area.
Channel Status: The option allows you open or close any channel
respectively.
Sensitivity: The option allows you to set sensitivity of motion detection to
Highest, High, normal and low.
The [System] Menu include the below sub-menu: Time Set, User
Password, Video Setting, Language select, System Info and System
Maintenance.
After entering into the [System], you could set the parameters freely as
per your actual situation.
Picture 5-26
Area Setting: The option allows you set the specified motion area. The
single channel is separated into the 13*10 trace. When any object is moving on
motion detection area, the trace, which the object located at, will display in red.
The semi-transparent part stands for motion detection for the area is off.
Picture 5-27
Picture 5-28
Server Address：Indicate IP address and DDNS of DVR on the public network.
Server Port：Web port: Same as other web port setting, you need to map the web port to
Router. Setting range is between 1024 and 65535. Please note the port number not equal to
other web port setting under the IP address
User Name:same as user name set to DVR.
Password：same as password set to DVR.(Please press Function key to save the password,
left soft key won’t be able to save the password)