Lincoln Electric IM558 Synergic 7 and 7H Water Cooled - Manual (Page 29)

C-2 ACCESSORIES C-2
WIRE REEL ASSEMBLY:
K303 - 50-60 lb. (22.7-27.2 kg) Wire reel mounting
stand. Assembly includes a framework to which is
attached the 50-60 lb. (22.7-27.2 kg) wire reel, a
mounting spindle, a dust shield, a lift bail, and a cable
clamp for fastening the input cable assembly. The
reel mounting spindle is the pull knob type with a built-
in brake. The brake pad is adjustable for proper brak-
ing at low or high wire feed speeds. In extremely
dusty and dirty locations a wire reel dust shield door
kit can be added to this unit.
This door kit, which includes a hinged door and sliding
bottom seal, makes the housing completely enclosed.
Order part number M11514.
K376 - Same as K303 above but without dust shield.
A dust shield that covers the wire reel and protects the
wire from falling dirt and dust is available for this unit.
Order part number S14543. This unit will also accept
the M11515 door kit (see K303 above) but only if
already equipped with optional dust shield (S14543).
K377 - Small mounting stand for Readi-Reel coils or
10-30 lb. (4.5-14 kg) spools with 2" (51 mm) I.D. This
assembly includes a small frame to which is attached
a 2" (51 mm) O.D. wire reel spindle and a K363P
Readi Reel adapter for using the Lincoln "Readi-Reel
Electrode Coils". Without the adapter, the unit is
capable of handling spools with a 2" (51 mm) I.D., a
12" (305 mm) maximum O.D., and a 4" (101 mm)
width.
K378 - Small mounting stand for 13-14 lb. (6 kg)
Innershield coils. This assembly includes the same
smaller frame as used in the K377 and a fully
enclosed canister system for de-reeling of the 14 lb. (6
kg) coil. This system has a fixed brake for this coil.
K445 - 50-60 lb. (22.7-27.2 kg) Readi-Reel mounting
stand. This assembly includes framework to which is
attached a 2" (51 mm) O.D. spindle with adjustable
brake and 50-60 lb. (22.7-27.2 kg) (K438) Readi-Reel
adapter. Includes a lift bail and cable clamp for fas-
tening the input cable assembly. Does not include a
dust shield. A dust shield that covers the wire reel
and protects the wire from falling dirt and dust is avail-
able for this unit. Order part number S14543. This
unit will also accept the M11515 door kit (see K303
above) but only if already equipped with optional dust
shield (S14543).
READI-REEL ADAPTERS:
K363P - Adapts Lincoln Readi-Reel coils of electrode
30 lb (14 kg) and 22 lb (10 kg) to a 2” (51mm) spindle.
Durable molded plastic one piece construction.
Designed for easy loading; adapter remains on spin-
dle for quick changeover. (used with K162H)
K438 - Adapts Lincoln Readi-Reel coils of electrode
50-60 lb (22.7-27.2 kg) to a 2” (51mm) spindle. (used
with K162H).
SPINDLE ADAPTERS:
K162H - Spindle for mounting Readi-Reels and 2”
(51mm) I.D. spools with 60 lb (27.2 kg) capacity. The
shaft for the standard wire coils is removed from the
mounting frame-work and the K162H is installed in its
place. Includes an easily adjustable friction brake for
control of overrun.
When used with Readi-Reels a Readi-Reel adapter is
required.
K435 - Permits 14 lb (6 kg) Innershield coils to be
mounted on 2” (51mm) O.D. spindles. For use with
optional K162H adapter.
K468 - Permits 8” (203mm) O.D. spools to be mount-
ed on 2” (51mm) O.D. spindles. For use with optional
K162H adapter.
GUN AND CABLE ASSEMBLIES:
The following Lincoln gun and cable assemblies are
equipped with a Fast-Mate™ connector. They can be
used with these Synergic 7 models.
K684 - Magnum “Water Cooled” FM water cooled
GMAW gun and cable assemblies are rated 450
amps, 100% duty cycle (CO
2
). (Consult sales specifi-
cations for appropriate models).
K498 - Magnum 200 FM GMAW gun and cable
assemblies are rated for 200 amps, 60% duty cycle.
(Consult sales specifications for appropriate models).
K534 - Magnum 250L FM GMAW gun and cable
assemblies are rated for 250 amps, 30% duty cycle.
(Consult sales specifications for appropriate models).
K478 - Magnum 300 FM GMAW gun and cable
assemblies are rated for 300 amps, 60% duty cycle.
(Consult sales specifications for appropriate models).
SYNERGIC 7 & 7H