Lincoln Electric IM841 INVERTEC V450-PRO - Manual (Page 17)

B-4 OPERATION B-4
8A. WELD MODE SELECT-FOR
MACHINES EQUIPPED WITH OPTIONAL
ADVANCED PROCESS PANEL
(See Figure B.2 UPPER AND MIDDLE SECTION)
See (WELD MODE DETAILS) in this section.
To program Welding modes. Select knob is used to
Scroll through all Welding modes. The Memory button
is used to store and access Welding modes into loca-
tions M1 thru M8.
Modes:
In addition to the 5 welding modes described in SEC-
TION 7, the Advance Process Panel allows you to
select the Following additional modes.
• Constant Power mode
In the Power Mode;
The work point will be in the Volts window. The
Amp window will have CP displayed indicating
Constant Power. Once current starts flowing and
during the 5 second “Hold” feature the displays will
show Volts and Amps respectively.
INVERTEC® V450-PRO
• Gouge Mode
The gouging mode is specifically designed for car-
bon arc gouging with electrodes up to 3/8”.
• Pulsed Modes
In Pulse Modes;
The work point will be in the Amps window and
should be set close to the wire feed speed of the
wire feeder in inches per minute. The Volts window
will have SPd displayed indicating Wire Feed
Speed. Once current starts flowing and during the 5
second “Hold” feature the displays will show amps
and volts.
Pulse Mode features that are displayed while selecting
a Welding pulse mode are listed below;
Steel - .030”, .035”, .045”, .052”, 1/16” – Argon Blends
Stainless Steel - .030”, .035”, .045” – Argon Blends &
Helium/Argon Blends
Aluminum - .035”, 3/64”, 1/16” – 4043 & 5356
Metal Core - .045”, .052”, 1/16” – Argon Blends
Nickel - .035”, .045” – Argon/Helium blends
OUTPUT OUTPUT KNOB KNOB
REMOTE REMOTE
ON ON
REMOTE REMOTE
LOCAL LOCAL
WELD WELD ERMINALS TERMINALS CONTR CONTROL OL
SELECT SELECT
SELECT SELECT
MPS MPS A OL OLTS TS V
ADVANCE PROCESS PANEL- MIDDLE SECTION OF WELDER (OPTIONAL)
MEMOR MEMORY
MEMOR MEMORY BUTT BUTTON ON
(M1 (M1 HRU M8) THRU M8)
SELECT SELECT BUTT BUTTON ON
(HOT (HOT ST STAR ART OR OR ARC CONTROL) ARC CONTROL)
ADJUST ADJUST KNOB KNOB
(0 (0 THRU +10 HOT THRU +10 HOT ST STAR ART) T)
(-10 (-10 HRU 0 THRU 0 AND 0 AND 0 THRU +10 THRU +10 ARC CONTROL) ARC CONTROL)
SELECT SELECT KNOB KNOB
(SCOLLS WELDING PROCESSES) (SCOLLS WELDING PROCESSES)
SELECT SELECT ADJUST ADJUST SELECT SELECT
FIGURE B.2