Lincoln Electric IM655 RED-D-ARC DC-400 - Manual (Page 17)

B-1 OPERATION
DC-400
B-1
SAFETY PRECAUTIONS
Read this entire section of operating instructions
before operating the machine.
ELECTRIC SHOCK can kill.
• Have an electrician install and ser-
vice this equipment.
• Turn the input power off at the fuse
box before working on equipment.
• Do not touch electrically hot parts.
• This next section applies to DC-400 ’ s without
the Capacitor Discharge Option:
----------------------------------------------------------------------
FUMES AND GASES can be dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to remove
fumes from breathing zone.
------------------------------------------------------------------------
WELDING SPARKS can cause fire or
explosion.
• Keep flammable material away.
• Do not weld on containers that have
held combustibles.
------------------------------------------------------------------------
ARC RAYS can burn.
• Wear eye, ear, and body protection.
------------------------------------------------------------------------
See additional waring information under Arc
Welding Safety Precautions and in the front of this
Operating Manual.
------------------------------------------------------------------------
GRAPHIC SYMBOLS THAT APPEAR ON
THIS MACHINE OR IN THIS MANUAL
Input (Power)
On
Off
POWER ON-OFF SWITCH
Output (Control)
Increase/Decrease of
Output (Voltage or
Current)
OUTPUT CONTROL DIAL
Remote Output
Voltage or Current
Control
Local Output Voltage
or Current Control
OUTPUT CONTROL “ LOCAL-REMOTE ” SWITCH
Circuit Breaker
CIRCUIT BREAKER
High Temperature
THERMAL PROTECTION LIGHT