Johnson Level & Tool Mfg. 40-6550 - Manual (Page 12)

automatically. With a second press of the power button on remote control,
the unit exits sleep mode and enters auto-level mode.
Using the Vertical Mounting Bracket
The vertical mounting bracket allows the unit to be used in the
vertical position on a table or tripod, but it can also be hung on a wall
for horizontal leveling (see drop ceiling application drawing example
on page 22).
To use the unit with the vertical mounting bracket (see figure):
1. Place the unit on its side with the handle up and the bottom facing
the bracket surface with the locking-knob. Attach the bracket to
the unit by screwing the locking knob thread into the base of the
unit.
2. Adjust the two leveling knobs on the base of the vertical mounting
bracket so that the bubble of the circular bull’s-eye level vial
(located on top of vertical mounting bracket) is centered.
12 ©2005 Johnson Level & Tool
Locking knob
Circular bull’s-eye level vial
Leveling knobs
40-6540_6550 English 6/28/05 9:44 AM Page 12