Elitegroup NM70-I (V1.0) - Manual (Page 36)

Chapter 3
NM70-I USER MANUAL
32
CPU Configuration
The item in the menu shows the CPU Configuration.
Main Advanced Chipset Tweak Boot Security Exit
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
64-bit (Supported)
This item shows the computer supports EMT64.
Processor Speed (1100MHz)
This item shows the current processor speed.
Processor Stepping (206a7)
This item shows the processor stepping version.
Microcode Revision (28)
This item shows the Microcode version.
Processor Cores (2)
This item shows the core number of the processor.
Intel HT Technology (Not Supported)
This item shows that the computer supports Intel HT Technology or not.
Intel VT-x Technology (Supported)
This item shows that the computer supports Intel VT-x Technology or not.
Number of cores to enable
in each processor package.
Active Processor Cores (All)
This item shows the number of cores to enable in each processor package.
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit
F4: Save & Exit
 /Click: Select Item
 : Select Screen
CPU Configuration
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
64-bit
Supported
Processor Speed 1100 MHz
Processor Stepping 206a7
Microcode Revision 28
Processor Cores 2
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores All
Limit CPUID Maximum Disabled
Execute Disable Bit Enabled
Intel Virtualization Technology Enabled
EIST Enabled
Turbo Mode Enabled
CPU C3 Report Enabled
CPU C6 Report Enabled
Enhanced Halt (ClE) Enabled
Configurable TDP TDP NOMINAL
Long duration power limit 0
Long duration maintained 0
Short duration power limit 0