Elitegroup TIGD2-I (V1.0) - Manual (Page 42)

TIGD2-I USER MANUAL
38
Chapter 3
Serial Port 4 Configuration
Scroll to this item and press to view the following screen:
Serial Port 4 Configuration
Serial Port [Enabled]
Device Settings IO=2E8h; IRQ=7;
Change Settings [Auto]
Serial Port 4 RS-485 [Disable]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Main Advanced Chipset Tweak Boot Security Exit
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3E8h; IRQ=7)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press to return to the Super IO Configuration page.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=2E8h; IRQ=7)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press to return to the Super IO Configuration page.
Serial Port 4 RS-485 (Disable)
Use this item to enable or disable the serial port 4 RS-485.