Elitegroup TIGD2-I (V1.0) - Manual (Page 35)

TIGD2-I USER MANUAL
31
Chapter 3
Resume by Alarm (Disabled)
This item allows users to enable or disable the alarm to wake up the system. If set
to Enabled, users can specify the specific day of month and the exact time to power
up the system.
Power Management Setup
This page sets up some parameters for system power management operation.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use this
item to do wake-up action if inserting the PCI card.
Resume By RING (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By USB (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Power Management Setup
Resume By RING [Disabled]
Resume By PME [Disabled]
Resume By USB (S3) [Disabled]
Resume By PS2 MS (S3) [Disabled
Resume By PS2 KB (S3) [Disabled]
Resume by Alarm [Disabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Tweak Boot Security Exit
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
About Resume by Ring
Press to return to the Advanced Menu page.
F2:Previous Values
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit