Elitegroup CDC-TI (V1.0A) - Manual (Page 41)

Chapter 3
CDC-TI USER MANUAL
37
Enabled for windows XPand
Linux (OS optimized for
Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). when Disabled
only one thread per
enabled core is enabled.
Main Advanced Chipset Tweak Boot Security Exit
Enter/Dbl Click : Select
Intel(R) Atom(TM) CPU D2700 @ 2.13GHz
This is display-only field and displays the information of the CPU installed in your
computer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Processor Speed (2132MHz)
This item shows the current processor speed.
Processor Stepping (30661)
This item shows the processor stepping version.
Microcode Revision (268)
This item shows the Microcode version.
Processor Cores (Dual)
This item shows the core number of the processor.
Intel HT Technology (Supported)
This item shows the computer supports Intel HT Technology.
Hyper-threading (Enabled)
This item only available when the chipset supports Hyper-threading and you are
using a Hyper-threading CPU.
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit
F4: Save & Exit
mn /Click: Select Item
lk : Select Screen
CPU Configuration
Intel(R) Atom (TM) CPU D2700 @ 2.13GHz
EMT64
Supported
Processor Speed 2132 MHz
Processor Stepping 30661
Microcode Revision 268
Processor Cores Dual
Intel HT Technology Supported
Hyper-threading Enabled
Limit CPUID Maximum Disabled
Execute Disable Bit Enabled
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
CPU Configuration
The item in the menu shows the CPU.