Elitegroup CDC-TI (V1.0A) - Manual (Page 39)

Chapter 3
CDC-TI USER MANUAL
35
Smart Fan Mode (Normal)
This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quite mode, the
fan speed will be auto minimized for quiet environment. If you choose Silent mode,
the fan speed will be auto restricted to make system more quietly. If you choose
Manual mode, the fan speed will be adjust depending on users’ parameters.
Smart Fan start PWM value (130)
Smart Fan start PWM TEMP(+) (48)
This item is used to set the start PWM value of the smart fan.
This item is used to set the start temperature of the smart fan.
DeltaT (+1)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
Smart Fan Slope PWM value (6 PWM value/unite)
This item is used to set the Slope Select PWM of the smart fan.
These items are used to set the CPU/System fan full speed offset values.
CPU/System Fan Full Speed TEMP(+) (60)
Press to return to the PC Health Status page.
• System Fan 1 Speed
• System Temperature
• System Fan 2 Speed
• CPU Voltage
• DIMM Voltage
• VAXG Voltage
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System temperature, CPU & DIMM voltage, CPU & System fan speed... etc.
Press to return to the Advanced Menu page.
System Smart Fan 1/2 Control (Enabled)
These items enable you to define the System by smartly adjusting the System Fans.
When they are set at certain temperature, the System Fan PWM values will change
accordingly.