Elitegroup V20 (V1.0) - Manual (Page 16)

10
Installing the System
2.3 Install the Key Components
2.3.1. Installing Memory Modules
‡
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only by
their edges. Do not touch the components or metal parts. Always wear a
grounding strap when you handle the modules.
‡
You must install one module in the slot. Total memory capacity is 8 GB.
‡
Refer to the following to install the memory modules.
‡ Install the memory module into the slot and press it firmly down until it
fits in place. Check that the cutouts on the memory module edge
connector match the notches in the memory slot.