Introducing the pc – Elitegroup V20 (V1.0) User Manual
Page 13
7
Introducing the PC
Note:
After you connect the AC/DC Adapter and the AC Power Core, please connect
the AC/DC Adapter to the DC-IN power connector in the Inside I/O port of
the computer first, then connect the AC Power Cord to the power.
1.5 Connecting your computer
Use the following information to connect your computer:
Look for the small connector icons on the back of your computer. Match the
connectors to the icons.
1. Check the voltage rating before you connect the equipment to an electrical
outlet to ensure that the required voltage and frequency match the available
power source.
Note:
Your computer might not have all of the connectors that are described in this
section. It mainly depend the motherboard you choose.
3. Your computer is equipped with a Memory Card Reader Connector, it is able
to read/write data from: SD/MMC/MS.
2. Connect the R45J LAN cable to the LAN port.