Elitegroup V20 (V1.0) - Manual (Page 15)

9
Installing the System
Chapter 2
Installing the System
2.2 Open the Chassis
Please refer to the following pictures to open the chassis.
Step 1. Loosen the four screws of the pedestal, then unlock the hooks along the
frame in anti-clockwise direction.
Step 2. Lift the screen to open the chassis.
2.1 Safety Precautions
Follow these safety precautions when installing the system:
• Wear a grounding strap attached to a grounded device to avoid damage
from static electricity.
• Discharge static electricity by touching the metal case of a safely grounded
object before working on the motherboard.
• Leave components in the static-proof bags.
• Always remove the AC power by unplugging the power cord from the
power outlet before installing.