Avaya 5600 Series User Manual

Page 6

connect the optional power supply to the

power connector; if the power supply is

already connected to the

and the power indicator LED is still not illuminated,

please contact your dealer of purchase to ask for help.

In the final step, please build the connection between the IP phone, computer and the

computer download port (Using a CAT6 cable is recommended). After that, switch the IP Phone

and computer on, and try the network function of both IP Phone and computer. If any of them are not working

properly, please re-check the cable connection and the state of power indicator LED.

There are 2 LEDs located on every Ethernet port of the

: One green LED

located on the right, and one amber LED on the left. If the connected device is switched on and the Ethernet

link is successfully built, the green LED will be illuminated, and it will blink when there is data transferring

over that port. The amber LED indicates the duplex mode of Ethernet port, if the link is in full-duplex mode, it

will be illuminated; if the link is in half-duplex mode, it will not be illuminated. If you think there is any problem

associated with an Ethernet port, please use these LEDs to determine if there is a problem.

Gigabit Ethernet Adapter's

Gigabit Ethernet Adapter

Gigabit Ethernet

Adapter's

Gigabit Ethernet Adapter

Note:

Maintenance

Contents of the Gigabit Ethernet Adapter Carton

Gigabit Ethernet Adapter

The

contains no user serviceable parts. To reduce the risk of electric shock, do

not disassemble the product.

To clean the

, first unplug the power supply from the wall receptacle, if any, and

disconnect all Ethernet cables from all Ethernet ports of the

. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Gigabit Ethernet Adapter for 4600 & 5600 IP Phones

700416985

CAT6 Ethernet Cable (6 feet)

700420847

Installation & Safety Instructions

Quantity

Description

Comcode

Note:

Gigabit Ethernet Adapter.

Gigabit Adapter Power Cable

When user does not use an IEEE Std 802.3af compliant switch or has a Class 3 phone, it will be

necessary to purchase local power accessories This will include the 1151C1/C2 power supply, AC power

cord, and an additional cable to connect the 1151C1/C2 power supply and the

If the phone is already connected to an 1151B type power supply, only the

is required.

1151C1/C2 Power Supply

700356447/700356454

6 Feet Gigabit Adapter Power Cable(4600&5600 IP

Phones only)

700416993

Quantity

Description

Comcode

When purchasing an 1151C1/C2, an additional A/C power cord is required. Avaya has several available to

meet regional plug configurations. Consult your Authorized Avaya deal for details.

Class 0 devices may also require use of the local power supply, depending on their power rating.

The following connection arrangements, shown in

can be used with the

Fig 1 shows the interfaces of the

Fig 2 shows the

powering option arrangement for IP Telephone models

4602SW, 5602SW, 4602SW+, 5602SW+, 4610SW, 5610SW

Fig 3 shows the

powering option arrangement for IP Telephone models

5620SW, 4620, 4620SW, 5621SW, 4621SW, 4622SW, 4625SW.

Fig 4 shows the

powering option arrangement for IP Telephone models

4630SW.

The type of cord(s) needed to make these connections are designated in each drawing.

Note:

Adapter

Note

Connecting the 1151C1/C2 Power Supply

Figures 1 - 4

Gigabit Ethernet

Gigabit Ethernet Adapter