Elitegroup G320 User Manual
Page 70

OnBoard COM Port
This option specifies the COM port.
The settings are Disabled, Enabled (default value)
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard.
The settings are Enabled (default value), or Disabled
Parallel Port Mode
This option specifies the parallel port mode.
The settings are SPP, EPP ECP, EPP+ECP (default value).
Change Supervisor Password
This field allows you to set the Supervisor password. To set the Supervisor password,
highlight this field and press the [Enter] key. The following dialog box appears:
Enter new supervisor password:
Auto Configuration with Optimal Settings
The optimal default settings are best-case values that should optimize system performance.
To set the configuration, highlight this field and press the [Enter] key. The following
dialog box appears:
Load high performance settings [Y/N] ?
Battery Calibration
This option helps execute the calibration of the system battery.
Execute Battery Calibration [Y/N] ?
68