Elitegroup G320 - Manual (Page 46)

Adjusting the LCD Screen Display
The LCD screen display can be adjusted by the following key combinations.
KEYS FUNCTIONS
[Fn] + [F7] Decreases the brightness level.
[Fn] + [F8] Increases the brightness level.
[Fn] + [F10] Use this key combination to expand your video screen or reset to its
original size.
[Fn] + [F12] This key combination toggles the display between the LCD display and
an external CRT or simultaneous.
LCD Care
LCD screens are delicate devices that need careful handling. Please pay attention to the
following precautions:
•
•
•
•
•
•
•
When you are not using the computer, keep the LCD screen closed to protect it from dust.
If you need to clean your LCD screen, use a soft tissue to gently wipe the LCD surface.
Do not put your fingers or sharp objects directly on the surface and never spray cleaner
directly onto the display.
Do not press on, or store any objects on the cover when it is closed. Doing so may cause
the LCD to break.
External CRT Display
You can hook up an external monitor through the 15-pin CRT connector. Three
configurations are available:
LCD only
CRT only
Simultaneous display of the LCD screen and CRT monitor
44