Elitegroup G320 - Manual (Page 60)

Installing the Printer
The installation of the printer is very easy. Simply connect the enclosed cable to connect the
notebook computer printer port to the printer. You also have to install the printer driver.
Please follow the instructions in the printer manual for installation.
Installing USB Devices
USB devices are Plug & Play, just plug the USB device into any USB port on the notebook
computer to use it.
There are some exceptions. Some devices will not be supported by the OS. In these cases
you follow the instructions in the device’s manual to install the proper drivers in order use
the USB devices.
Connecting to the network
Unless you are a technician, we do not recommend that you install to the Ethernet all by
yourself. The illustration only shows how to connect the notebook to the network, the actual
application and setting should be done following the instructions in the OS manual, or you
should ask for a technician’s professional assistance.
Installing the modem
Using the modem to connect to the Internet is a common practice. Connect the modem to
this notebook according to the methods described on the right, and then use a phone cable to
connect the slot on the modem to the jack of the phone line. The hardware installation is
complete.
Then follow the instructions from your ISP (Internet Service Provider), to make the proper
connection to the Internet.
Connect peripheral devices to the computer's interface ports as shown below:
58