Elitegroup A530_TM5600 - Manual (Page 7)

- v -
f f . . If the equipment has obvious sign of breakage.
1 1 4 4 . . Do not leave this equipment in an environment unconditioned, storage
temperature above 60
° C (140 ° f), it may damage the equipment.
1 1 5 5 . . The unit can be operated at an ambient temperature of max. 35 ° C.
1 1 6 6 . . The sound pressure level at the operators position according to IEC 704-1:
1982 is equal or less than 70 dB(A).
1 1 7 7 . . Power Cord Requirements
The power cord set used with the AC adaptor must meet the requirements of
the country where you use the AC adaptor, whether it is 100-120 or 200-240
Vac. The following information explains the requirements for power cord set
selection.
• The cord set must be approved for the country in which it is used.
• The appliance coupler must have a configuration for mating with a
CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
• The cord set must be UL Listed and CSA Certified.
• The minimum specifications for the flexible cord are No. 18 AWG.
B. For Japan:
• All components of the cord set must bear a “ T ” mark and
registration number in accordance with the Japanese Dentori Law.
• The minimum specifications for the flexible cord are .75m ㎡
conductors.
C. For Other Countries:
• The cord set fittings must bear the certification mark of the agency
responsible for evaluation in a specific country.