Using bios, Sata configuration – Elitegroup A990FXM-A Deluxe (V1.0) User Manual
Page 41
37
Using BIOS
SATA Configuration
Use this item to show the mode of serial-ATA configuration options.
Serial-ATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
SATA Port 1~6 (Not Present)
This motherboard supports six SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
Press
SATA Configuration
Serial-ATA Controller
[Enabled]
SATA Mode
[IDE Mode]
PATA Controller
[Enabled]
eSATA 6Gb/s Controller Mode
[AHCI Mode]
SATA Port1
Not Present
SATA Port2
Not Present
SATA Port3
Not Present
SATA Port4
Not Present
SATA Port5
Not Present
SATA Port6
Not Present
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced
Chipset M.I.B X Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enabled/Disabled SATA
Contreller
eSATA 6Gb/s Controller Mode (AHCI Mode)
Use this item to select eSATA mode.
PATA Controller (Enabled)
Use this item to enable or disable the PATA device.