Davey SUPERCELL 60F, 80F, 100F, 130F, 200F, & 250F PRESSURE TANKS - Manual (Page 2)

READ ALL INSTRUCTIONS BEFORE INSTALLING YOUR NEW
SUPERCELL TANK
These instructions have been prepared to acquaint you with the correct
method of installing and operating your Supercell Tank. We urge you
to study this publication carefully and follow its recommendations. In
the event of installation difficulties or the need for further advice, you
should contact the Dealer from whom you purchased the system or your
nearest Davey Water Products Sales Office.
INSTALLATION MUST BE IN ACCORDANCE WITH LOCAL
PLUMBING CODES WHERE APPLICABLE.
- 2 - - 7 -
NOTE:
* Supercell 60F, 80F, 100F, 130F, 200F and 250F will accept water up to
50ºC maximum.
* Be sure to protect the Supercell tank and all associated pumps and piping
from freezing temperatures.
Either / or
NOTE: All tanks must have
equal pre-charge.
TYPICAL INSTALLATIONS
TYPICAL MULTIPLE TANK INSTALLATIONS
NOTE:
Isolation valves, draw valves and gauges will improve serviceability.
NOTE:
Isolation valves, draw valves and gauges will improve serviceability.
TYPICAL INSTALLATIONS
TYPICAL MULTIPLE TANK INSTALLATIONS
With Submersible Pump
With Convertible Jet Pump
TYPICAL INSTALLATIONS
TYPICAL MULTIPLE TANK INSTALLATIONS
With Submersible Pump
With Convertible Jet Pump
TYPICAL INSTALLATIONS
TYPICAL MULTIPLE TANK INSTALLATIONS
With Submersible Pump
With Convertible Jet Pump