Davey Speedman Compact Constant Water Pressure Systems - Manual (Page 15)

15
WARNING: When servicing or attending pump, always ensure
power is switched off and lead unplugged. Electrical connections
should be serviced only by qualified persons. If the electrical
supply lead of this pressure system is damaged, it must be
replaced.
NOTE: For protection, the Davey ® pump controller monitors input
current and will shut down the pump motor in the event of an over
load.
Care should also be taken when servicing or disassembling
pump to avoid possible injury from pressurised water. Unplug
pump, relieve pressure by opening a tap on the discharge side
of the pump and allow any hot water in the pump to cool before
attempting to dismantle.
During servicing, use only approved, non-petrochemical based
oring and gasket lubrication. If unsure, consult your Davey Dealer
for advice.
WARNING: Do not use hydrocarbon based or hydrocarbon
propelled sprays around the electrical components of this pump.