Davey RAINBANK PRO RAINWATER HARVESTING SYSTEM - Manual (Page 6)

6
RainBank ® PRO Control Panel Operation
The following explanations describe the
RainBank
® PRO control panel and its operation.
MAINS/RAIN WATER SWITCHING
Indicators
LED indicators are used to display
• POWER ON
Mains power supply is on
• MAINS WATER
Mains water supply is in use
• RAINWATER
Pumped rainwater is in use
• TANk LOW LEVEL
Low level in water storage tank, mains water will
be in use
• PUMP FAULT
Pump is in fault and mains water will be in use
• SOLENOID TEST
While depressed mains water solenoid will open,
and pump will not run.
PUMP CONTROL
Indicators
LED indicators are used to display
• POWER ON
Mains power supply is on
• PUMP RUN
Pump is operating
• LOW FLOW ALARM
Water flow failure (60 second timer)
• PUMP OVERLOAD
Thermal overload on pump contactor has tripped
• FAULT RESET
Resets the LOW FLOW fault
PUMP MODE SELECT BUTTON
• AUTO
Pump ready to operate from the control input
devices
• OFF
Pump selected to not operate
• MANUAL
The pump will operate in manual mode for 2
1 /
2
minutes then the control panel will switch to
AUTO.
ALARM FUNCTIONS
• AUDIO ALARM
Will automatic mute after 5 minutes
• VISUAL ALARM and STROBE
Will continue to function until the fault is
corrected or the fault reset button is pressed.