Davey RAINBANK PRO RAINWATER HARVESTING SYSTEM - Manual (Page 2)

2
CONTENTS
RainBank ® PRO PUMP SET COMPONENTS 3
CONNECTION TO MAINS SUPPLY 4
PRESSURE SWITCH 4
TANK PRECHARGE 4
CHOOSING A SITE 4
POWER CONNECTION 4
ELECTRICAL POWER SURGE PROTECTION 4
PIPE CONNECTIONS 5
WHERE TO USE CHECK VALVES AND FOOT VALVES 5
ABRASIVE METALS 5
INSTALLATION WITH A MAINS PRESSURE HOT WATER SYSTEM 5
PRIMING AND OPERATION 5
CONTROL BOX OPERATION 6
CONNECTION DIAGRAM – 240V 7
CONNECTION DIAGRAM – 415V 8
TYPICAL INSTALLATION 9
MAINTENANCE 10
PRESSURE SETTINGS 10
TROUBLE SHOOTING CHECK LIST 11
TERMS AND CONDITIONS 12
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipework is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation and Operating Instructions. Read
these in their entirety before switching on this pump. If you are uncertain about any of these Installation and Operating
Instructions please contact your Davey dealer or the appropriate Davey office as listed on the back of this document.