Brocade Virtual ADX OpenScript Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 30)

22 Brocade Virtual ADX OpenScript Programmer’s Guide
53-1003244-01
Copying and binding the script
4
Copying and binding the script
The following command secure copies the addip.pl script from the /home/test directory on the
Linux server 1.1.1.1 to the Brocade Virtual ADX.
scp [email protected]:/home/test/addip.pl /opt/ADX/openscripts/dpscript/addip.pl
The script is bound to the “vs1” virtual server as shown.
VirtualADX(config)# server virtual vs1
VirtualADX(config-vs-vs1)# port http script addip.pl
Sample Brocade Virtual ADX configuration for use case.
The following is an example of a Brocade Virtual ADX configuration which includes the required
bind commands for the “addip.pl” script.
Example 1:
VirtualADX# configure terminal
VirtualADX(config)# server real rs1 100.1.5.113
VirtualADX(config-rs-rs1)# port http
VirtualADX(config-rs-rs1)# port http url HEAD/
VirtualADX(config-rs-rs1)# port http group-id 10 10
VirtualADX(config-rs-rs1)# exit
VirtualADX(config)#
VirtualADX(config)# server real rs2 100.1.5.114
VirtualADX(config-rs-rs2)# port http
VirtualADX(config-rs-rs2)# port http url “HEAD/”
VirtualADX(config-rs-rs2)# port http group-id 10 10
VirtualADX(config)# server virtual vs1 100.1.5.101
VirtualADX(config-vs-vs1)# port http
VirtualADX(config-vs-vs1)# port http script addip.pl
VirtualADX(config-vs-vs1)# bind http rs1 http rs2 http