Viewing a port commissioning deployment report, Viewing a port, Commissioning deployment report – Brocade Network Advisor Port Commissioning Quick Start Guide (Supporting Network Advisor 12.3.0) User Manual
Page 18: Viewing a port commissioning, Deployment report, Viewing a port commissioning deployment, Report
18 of 21
Brocade Network Advisor Port Commissioning Quick Start Guide
Publication Number: 53-1003220-01
Viewing a port commissioning deployment report
To access a port commissioning deployment report, complete the following steps.
1. Select Configure > Task Scheduler.
The Task Scheduler dialog box displays.
2. Click the Log tab.
A list of deployment configurations that are executed and the status of each displays.
3. Select the port commissioning deployment report you want to view and click Report.
4. Review the contents of the port commissioning deployment report.
The Configuration Deployment Report table contains the following parameters:
•
Date and Time — The date and time of the deployment.
•
Export — Select to export the results to CSV or HTML (refer to
“Exporting and saving a report to a file”
•
Email — Select to e-mail the results (refer to
•
Configuration Name — Name of the deployment.
For example, Decommission/Recommission - switch_name, Decommission/Recommission - switch_name -
blade, or Decommission/Recommission - switch_name - Ports.
•
Description — A description of the deployment.
•
Module — The module name. For example, Port Commission.
•
Sub Module — The sub module name.
•
Deployment Time — Time when the deployment occurred. Click to launch the detailed deployment results.
•
Status — Status of the deployment.
•
Creator — Name of the user that performed the deployment.
The Deployment Results table contains the following data:
•
Configuration Name — Name of the deployment.
For example, Decommission/Recommission - switch_name, Decommission/Recommission - switch_name -
blade, or Decommission/Recommission - switch_name - Ports.
•
Product — The product name.
•
Status — The status of the deployment. For example, Success or Failed.
•
Reason — The port level status of the decommission or recommission. Also, provides the following data for
each CIMOM server associated with the port:
IP Address — The IP address of the CIMOM server.
Reason — The deployment request and whether it was successful or not.
Status — The status of the deployment. For example, Allowed or Failed.
5. Click the close button (X) to close the deployment report.