Boltek LD-350 - Manual (Page 14)

O P E R A T I O N
9
Operation
Stand-Alone Operation
The LD-350 can also be used as a stand-alone lightning detector without the need of a
computer. The indicators, and internal beeper can be monitored when storms approach to
determine lightning approaching. It can initially be connected to a computer to change the
default alarm values, and squelch level if they aren't suitable.
If the optional LTS-3 timestamp card is installed on the LD-350, then it can also operate and
transmit data to the Lightning Network if there is an available Network connection without the
need of a computer.
Front Panel Controls
Main Power Button
The main power button disconnects 12V power from the LD-350, the antenna, the USB
connector, and the LTS-3 connector (if option installed) on the rear of the LD-350.
Note: Lightning Display software needs to be started/restarted after the LD-350 is powered
on, or if there are any power interruptions to the LD-350 during use.
Chapter 2