STI AP-1-G-I - Manual (Page 3)

- 5 -
Alert Point Installation
Horizontal position - `0FF’.
Vertical position - `ON’.
Depress the operating element.
A warning indicator drops into view,
the unit will alarm and the LED will
turn red when the Alert point is
activated.
Step 5. Turn the unit `ON’
Step 6. Test
Using the Master Key, turn the Key Switch Cylinder to the Vertical position. The LED
will flash green when turned `ON’ – unit in `standby condition.’
Simply insert the
reset key into the
bottom of the Alert
Point.
A quick turn of the key
and the Alert Point is
reset, returning to
`standby condition’ and
is ready for use straight
away.
Step 7. Reset the unit
- 6 -
Using the 2 pips on the reset key provided, push firmly into each of the 4 corner clips individually, releasing
them, whilst at the same time gently pulling the cover away from the remainder of the unit.
Removal of the front cover