ReadyLIFT Ford Raptor 2010-2014 - Uniball Lower Control Arm Kit - Pair - Manual (Page 7)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 44-2303
7
Revised Feb‐14
Final Checks & Adjustments
Post Installation Warnings: Once the vehicle is lowered to the ground, check all
parts which have rubber or urethane components to insure proper torque. Torque
wheels to factory specs. Move vehicle backwards and forwards a short distance to al-
low suspension components to adjust. Turn the front wheels completely left then
right and verify adequate tire, wheel, brake line, and ABS wire clearance. Test and
inspect steering, brake and suspension components for tightness and proper opera-
tion. Inspect brakes hoses and ABS lines for adequate slack at full extension. Failure
to perform the post inspection checks may result in vehicle component damage and/or
personal injury or death to driver and/or passengers. Test drive vehicle and re-check
the torque of all fasteners and re-torque wheels on vehicle. Re-adjust headlamps.
Vehicle Handling Warning: Vehicles with larger tires and wheels will handle differ-
ently than stock vehicles. Take time to familiarize yourself with the handling of your
vehicle.
Wheel Alignment/Headlamp Adjustment:
It is necessary to have a proper and professional wheel alignment per-
formed by a certified alignment technician. Align the vehicle to factory
specifications. It is recommended that your vehicle alignment be checked
after any off-road driving. In addition to your vehicle alignment, for your
safety and others, it is necessary to check and adjust your vehicle head-
lamps for proper aim and alignment
Vehicle Re-Torque and Safety Inspection:
Upon completion of all services and adjustments performed on your vehicle, and
within 50 miles of driving, check to ensure all fasteners and hardware are properly
torqued to specification as noted in the vehicles factory service manual or the torque
chart included.