ReadyLIFT Ford Raptor 2010-2014 - Uniball Lower Control Arm Kit - Pair User Manual
Page 4
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 44-2303
4
Revised Feb‐14
Unbolt the UCA from the spindle and move the spindle to allow for the
axle to slide out.
9.
Unbolt the spindle from the lower control arm. Remove the spindle.
10.
Unbolt the sway bar end link from the sway bar.
5.
Unbolt the brake line and unhook the vacuum line from the spindle.
6.
Remove the rotor, dust cap and the nut from the axle.
8.
Unbolt the shock from the lower control arm, let the arm hang down.
11.
Unbolt the shock from the top and remove from the vehicle.
12.
Unbolt the tie-rod from the spindle.
7.
This step is optional and done for extra working room.