ReadyLIFT Ford Raptor 2010-2014 - Uniball Lower Control Arm Kit - Pair User Manual
Page 5
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 44-2303
5
Revised Feb‐14
Unbolt and remove the lower control arm.
13.
Install the ReadyLIFT® lower control arm.
14.
Re-install the shock at the top.
15.
Install the lower shock into the lower control arm.
16.
Remove the CV joint seal from both of the spindles.
17.
Install the misalignment spacers into the LCA uniball. Install the pin with a
washer and c-lock nut hand tightened
18.
Install the spindle onto the LCA. With a washer and a standard nut,
tighten the nut down to seat the pin into the spindle.
19.
Remove the standard nut and replace with a c-lock nut and tighten.
20.