Nematron M-Series Monitors - Manual (Page 33)

33
1 2
4 3
USB-B CONNECTOR ON
REAR OF MONITOR
Touch Screen Pin Assignment
Serial RS-232
Pin No. Name Description
1 DCD Data Carrier Detect
2 RX Receive Data
3 TX Transmit Data
4 DTR Data Terminal Ready
5 GND Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9 RI Ring Indicator
USB
Pin No. Name Description
1 VBUS +5V Power
2 USB_D
− USB Data −
3 USB_D+ USB Data +
4 GND Ground
Note: The touch controller receives it power from the monitor’s internal power
supply – not through the USB conn
Baud Rate 9600
Data Size 8 Bits
Stop Bits 1 Bit
Parity No Parity (Only)
Handshaking Hardware CTS/RTS