Nematron M-Series Monitors - Manual (Page 3)

3
Chapter 1 - Introduction
The M-Series are high performance TFT flat panel monitors specifically designed for harsh
industrial environments including Class I & II, Division 2 Hazardous Locations. The monitors accept
standard analog VGA or Digital DVI inputs. They can display VESA video modes up to 1680 x 1050 at
75Hz with 16 million colors. An optional 5-wire analog touch screen is available that offers both RS-232
and USB interface capability. The monitor is housed in a heavy duty steel chassis with a powder coated
machined aluminum bezel. The monitor is certified to NEMA 4/4X/12 standards, is UL/CUL listed, meets
CE requirements and is RoHS compliant. Panel mounting is simplified using convenient mounting clips
instead of conventional studs. Options include: a 5-wire analog resistive touch screen or clear Lexan
window, a 304 stainless steel bezel, rack mount bezel (M1900 only), enclosed versions (M1500 and
M1900 only), and 24 volt DC input power supply (not available on the enclosed options). All monitors are
shipped with a power input wiring receptacle, VGA cable, touch screen cable (if equipped), mounting
hardware, manual and driver software.
Features
• UL 508 and ANSI/ISA 12.12.01-2012 listed for Hazardous Locations: Class I, Division 2, Groups
A, B, C, D and Class II, Division 2, Groups F and G, Class III hazardous locations when mounted
in a NEMA Type 1, 4, 4x, or 12 enclosure (does not include –EN options, -EN units only have UL
508 approvals only)
• NEMA 4/4X/12 front bezel (does not include –EN or –RM options)
• 2-Year warranty
• RoHS Compliant
• Integral 100 -240 VAC power supply
• Simplified installation with no studs
• Thin design – Only 2.7” behind bezel
• Accepts Analog Video or Digital Video (DVI) inputs
• VESA compliant – all modes up to WSXGA+, 75Hz
• Optional 5-wire resistive touch screen with both RS-232 and USB interface
• Optional 304 stainless steel front bezel
• Optional 24 VDC input power
• Optional Rack Mount front bezel on the M1900 (19”)
• Optional Rear NEMA 1 Enclosure (-EN)