Nexo GEO S8 - Manual (Page 21)

GEO TANGENT ARRAY RIGGING SYSTEM P.21
Contacts
Correct training is fundamental to safe practise when working with loudspeakers flying systems. NEXO
recommend that users contact local industry associations for information on specialist course.
Information for International training agencies can be obtained by contacting either:
The Production Services Association (PSA),
School Passage,
Kingston-upon-Thames,
KT1 SDU Surrey,
ENGLAND
Telephone: +44 (0) 181 392 0180 Rigstar Training and Testing Center
82 Industrial Dr. Unit 4
Northampton, Massachusetts 01060 U.S.A.
Phone: 413-585-9869 -- Fax: 413-585-9872
[email protected]
ESTA
Entertainment Services & Technology Association
875 Sixth Avenue, Suite 1005
NEW YORK, NY 10001 USA
Phone: 212-244-1505 – Fax: 212-244-1502
[email protected] - www.esta.org
GEO Loudspeakers
Front connection
point
Angle setting bar
Angle setting plate
Pivot point
Avoids the bar
of the last cabinet to fall
GEO S850 and S830 Tangent Array Modules are shipped from the factory with identical array assembly
hardware. The GEO Tangent Array Assembly System has three attachment points on each side. The points
in the front connect each GEO cabinet to the adjacent enclosures above and below. The angle between
cabinets is set by attaching one end of the angle-setting bar to the proper hole on the angle-setting plate,
which extends beyond the rear of the cabinet.
The front connection points and the angle-setting holes in the angle plate are milled for the supplied pins,
which have a diameter of 8 mm. Possible replacements for specific applications include:
• Nuts and bolts with a diameter of 8mm or 5/16 in. (7.94 mm) for fixed installation
• 8mm (NEXO REF: BLGEOS) or 5/16 in pins with spring-loaded locking balls for quicker
array assembly and disassembly in portable applications.