Nexo GEO S8 - Manual (Page 12)

P.12 NX242 DIGITAL TDCONTROLLER SETTINGS
S805 9-16 boxes CD12 Flown
Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.
Configure GEO S805 (9-16 boxes) with CD12 flown.
GEO Horizontal Tangent Arrays
Input/Output Assignments: GEO S8 Series Wideband
Configurations (No Sub)
Input A Input B
Left Right
Output 4 HF Output 3 HF Output 2 LF Output 1 Sub
Left Right No Signal No Signal
S830 3 boxes No Sub
Stereo Setup. Input A (Left) & B (right). Output 3 (left) and 4 (right). No signal on output 1 &2.
Configure three GEO S830 Wideband.
Input/Output Assignments: GEO S8 + CD12 Configurations
Input A Input B
Mono No Signal
Output 4 HF Output 3 HF Output 2 LF Output 1 Sub
No Signal GEO S8 CD12 Front Driver CD12 Back Driver
S830 3 boxes CD12 Flown
Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.
Configure three GEO S830 with a CD12 flown.
S830 3 boxes CD12 Ground
Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.
Configure three GEO S830 with a CD12 ground.
Speaker Quantity
Speaker Quantity (MENU 1.7)
parameter acts on an Array
EQ that has been tuned to
reduce the coupling effect of
multiple GEO cabinets at Low
Frequencies. It will help you
to fine tune your system
according to the number of
cabinets and personal taste.
Array EQ is at 0dB when
Speaker Quantity is 8, boosts
for lower quantities, and cuts
for higher quantities.