Nexo STM Series - Manual (Page 2)

2
SAFETY FIRST
Read User Manual before deployment.
Before use of enclosed speaker system, please ensure that anyone involved in system
deployment understands the rigging safety rules as described in the speaker system
User Manual. Failure to do this exposes people to potential injury or death.
NS-1 is a dedicated calculation software that will give you vital information on your
coverage, but also your load limitations, rigging, and mechanics.
DO NOT PROCEED if you have not run NS-1 prior to implementing STM.
Mounting precautions
•
Choose mounting hardware and an installation location that can support the weight of
the speaker system.
•
Do not use speaker handles or any other rigging methods than those specified by
Nexo for suspended installation.
•
Do not expose speaker system to excessive dust or vibration, or extreme cold or heat
to prevent possibility of component damage.
•
Do not place the speaker system in an unstable position from which it might fall
accidentally.
Health and Safety
•
Please ensure you follow all your local Health and Safety regulations when using
Nexo STM and any other Nexo products.
•
Make sure all people on-site are approved and wearing the required PPE .
•
Respect Legislation on heavy lifting limitations. One STM M46 or B112 module
weighs 59Kg (2 person lift!)
•
Nexo supplies a list of approved accessories. Please do not use any other accessories,
for your own and other’s safety.
•
STM is capable of delivering extremely high sound pressure levels. Please ensure that
you are complying to local legislation and that personnel are not exposed to
dangerous levels and are wearing the necessary ear protection.
•
When implementing STM, please take into account the effect of wind on the load. In
case of wind exceeding Beaufort 8, clusters must be lowered at ground level.