PreSonus Central Station PLUS - Manual (Page 25)

21 21
Owner’s Manual
Getting S
tar
ted
Ov
er
view
Calibr
ation
Sample H
ook
up D
iagr
ams
Con
trols
and C
onnec
tions
Technical Informa
tion
Con
tr
ols
and C
onnec
tions
Controls and Connections 5
Central Station Remote 5.3
5.3 CSR-1: Central Station Remote
The Central Station Remote Control (CSR-1) connects to the rear of the Central
Station via a proprietary DB15 cable (included with the Central Station Plus) to
control Volume, Talkback, Mute, Input Source Switching and Speaker Output
Switching functions. Allowing you to keep the Central Station in your rack
with your gear and use the CSR-1 on your desktop for ultimate control and
flexibility. This section will familiarize you with the CSR-1 control functions.
Please Note: Your Central Station Plus system can be used with or without
the CSR-1 connected. When using your Central Station without the
remote, simply control all functions from the main unit..
5.3.1 CSR-1 Controls
Below is a diagram of the CSR-1 controls. Each control corresponds
directly to the same control on the Central Stration. All CSR-1 functions
control their corresponding Central Station functions, except for the
Talkback Mic level. The Central Station and CSR-1 retain independent
control over their respective onboard talkback microphones.
Digital Input Select:
Selects the S/PDIF or
Toslink input as the digital
source for the Cue and
Main audio paths.
Talkback Mic and Level: The Talkback Mic Level adjusts
the gain for the built-in eletret condenser microphone on
the CSR-1 only.
Because the Talkback Mic in the CSR-1 remains active
when an external microphone is connected, we recom-
mend you turn the Mic Level all the way down when using
an external talkback microphone.
Passive Speaker
Controls
Speaker Select A,B,C:
Activates the stereo
speaker line outputs.
Mute: Mutes the Main
Audio Output.
Dim: Attenuates the Main
audio output by -16 dB.
Mono: Sums the left and
right signals.
Input Select Buttons
TRS1: Patches the analog
TRS1 input to the Mains.
TRS2: Patches the analog
TRS2 input to the Mains.
Digital: Patches the
current digital input
selection to the Mains.
Aux: Patches the analog
Aux input to the Mains.
Main Level: Adjusts the
overall volume level of
the Main output.
Active Light: When
illuminated, this light
alerts you that your CSR-1
has Main Volume Control.
Talk Button: Engages /
disengages the talkback
microphones on both
the CSR-1 and the
Central Station.
Because both micro-
phones remain active
when the CSR-1 is
connected, it is recom-
mended that you turn the
Talkback Mic level all the
way down on the main
unit when you are not
using it.