Ring delay, Auxiliary ring 1, Auxiliary ring 2 – Avaya 3600 Series User Manual
Page 16: Phone options, Noise mode, Key tones, Warning tones, Display contrast, Keypad autolock, System info
Avaya Inc.
Desktop Charger, Dual Charger, and Quad Charger User Guide
Ring delay Determines how long the vibrate cadence will play before the
audible ring starts. If the Ring Cadence or Vibrate Cadence is
turned off, the Ring Delay option will not appear on the menu.
Select the desired length of Ring Delay:
No
delay: the audible ring starts as soon as the handset starts to
vibrate.
5
second
delay: the handset vibrates for five seconds before the
audible ring starts.
10
second
delay: the handset vibrates to ten seconds before the
audible ring starts.
Auxiliary ring 1
Auxiliary ring 2
Designed to be utilized by OAI applications, enabling the user to
set a distinctive ring for these applications. Select the desired
Auxiliary Ring
Phone options
Noise mode Provides options that describe the noise level in your
environment. Selecting the correct option will adjust the WT to
account for background noise. Select
Normal
for most office
environments;
High
for moderate background noise; or
Severe
for extremely noisy conditions. Use of the non-Normal modes is
not recommended unless you are in a loud environment or you
may find it difficult to be heard on your WT.
Key tones Determine if tones play when keys are pressed. Key tones are
enabled by default. Turn key tones on or off.
Warning tones: Play to alert user to various conditions, such as system up or
down, out of range, etc. These tones are enabled by default. Turn
warning tones on or off.
Display contrast Adjusts the display for different lighting situations. Set contrast
by pressing the
Up
and
Down
side buttons until the desired
contrast is displayed and then pressing the
OK
softkey.
Keypad autolock Locks the keypad automatically when in standby mode. The
automatic locking function of the keypad may be disabled (the
default) or adjusted for a delay before locking. Select desired
keypad autolock delay:
Disable
: the keypad will not lock.
5 seconds
: the keypad will lock in five seconds
10 seconds
: the keypad will lock in ten seconds
20 seconds
: the keypad will lock in 20 seconds
System info
Phone IP address Displays the IP address currently assigned to the WT. This
number may not be edited.
Gateway IP address or
Server IP address
Displays the IP address currently assigned to the Telephony
Gateway (in SRP) or the Avaya Voice Priority Processor
(AVPP).
Firmware version Displays the software version running the WT.
21-300632, Issue 1, July 2005
Page 16