PreSonus AudioBox USB - Manual (Page 43)

39
Owner’s Manual
Ov
er
view
Hook
up
Connec
ting
to
a
Comput
er
Tut
orials
Technical Informa
tion
Tr
oubleshooting and
W
arr
an
ty
Studio O
ne Ar
tist
Tutorials 5
Tut
orials
A Brief Tutorial on Dynamic Processing 5.2
Frequency Key Filter. Some gates offer a variable frequency control allowing the
user to set a specific frequency band that the will cause the gate to open or close.
Noise Gating. Noise gating is the process of removing unwanted sounds
from a signal by attenuating all signals below a set threshold. As described,
the gate works independently of the audio signal after being “triggered” by
the signal crossing the gate threshold. The gate will remain open as long as
the signal is above the threshold. How fast the gate opens to let the “good”
signal through is determined by the attack time. How long the gate stays open
after the signal has gone below the threshold is determined by the hold time.
How fast the gate closes is determined by the release. How much the gate
attenuates the unwanted signal while closed is determined by the range.
Noise gates were originally designed to help eliminate extraneous noise and
unwanted artifacts from a recording, such as hiss, rumble, or transients from other
instruments in the room. Since hiss and noise are not as loud as the instrument being
recorded, a properly set gate will only allow the intended sound to pass through;
the volume of everything else is lowered. Not only will this strip away unwanted
artifacts like hiss, it will add definition and clarity to the desired sound. This is a very
popular application for noise gates, especially with percussion instruments, as it
will add punch or “tighten” the percussive sound and make it more pronounced.
5.2.3 Compression Settings: Some Starting Points
The following are the compression presets that were used in
the PreSonus BlueMax. We have included them as a jumping-off
point for setting up compression in Studio One Artist.
Vocals
Soft. This is an easy compression with a low ratio setting for ballads, allowing a wider
dynamic range. It’s good for live use. This setting helps the vocal “sit in the track.”
Threshold Ratio Attack Release
-8.2 dB 1.8:1 0.002 ms 38 ms
Medium. This setting has more limiting than the Soft compression setting,
producing a narrower dynamic range. It moves the vocal more up front in the mix.
Threshold Ratio Attack Release
-3.3 dB 2.8:1 0.002 ms 38 ms
Screamer. This setting is for loud vocals. It is a fairly hard compression setting for
a vocalist who is on and off the microphone a lot. It puts the voice “in your face.”
Threshold R Ratio Attack Release
-1.1 dB 3.8:1 0.002 ms 38 ms
Percussion
Snare/Kick. This setting allows the first transient through and compresses
the rest of the signal, giving a hard “snap” up front and a longer release.
Threshold Ratio Attack Release
-2.1 dB 3.5:1 78 ms 300 ms