Stuart Turner Jet Pump 45 - Manual (Page 13)

- 13 -
6 TECHNICAL SPECIFICATION
Model Jet 55-45 Jet 80-45
Electrical
Power supply
Volts/phase frequency
230/1/50 230/1/50
Enclosure IPX4 IPX4
Type of motor Induction Induction
Power consumption 650 Watts 900 Watts
Full load current 2.9 Amps 4.1 Amps
Rating Continuous (S1) Continuous (S1)
Max. No Starts per hour 30 30
Mechanical
Min inlet head 1 metres 1 metres
Max inlet head 5 metres 5 metres
Max head (closed valve) 43 metres 45 metres
Max working pressure* 480 kPa (4.8 bar) 500 kPa (5.0 bar)
Max ambient air temperature 40 o C 40 o C
Max water temperature** 35 o C 35 o C
Min water temperature 4 o C 4 o C
Max. suction lift 5 metres 5 metres
P
ump
Dimensions
Length (max) 341 mm 368 mm
Width (max) 217 mm 224 mm
Height (excluding flexible hoses) 238 mm 238 mm
Gross Weight (including accessories) 6.78 Kg 8.96 Kg
Pump Connections: Inlet G 1 Female G 1 Female
Outlet G 1 Female G 1 Female
Materials
Body Stainless Steel Stainless Steel
Shaft Stainless Steel Stainless Steel
Mechanical Seal EPDM/Carbon/ceramic EPDM/Carbon/ceramic
Pump Parts GEPPO GEPPO
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: Max working pressure is the maximum pressure that can be applied to the
pump internal casing under any installation conditions.
6.11 Noise: The equivalent continuous A-weighted sound pressure level at a distance
of 1 metre from the pump does not exceed 73 dB(A) for Jet 55-45 or 76 dB(A) for
Jet 80-45.